Wall cabinets from floor to ceiling are simple solution garage storage cabinets and are a good project for the average homeowner. To make cabinets on the wall, you can better use the space of the garage and save the cost of buying expensive storage units. Use the search engine to find the place structures in the garage where to place the cabinets. Mark their location on the wall with a pencil.
Measure the space where you plan to place the garage storage cabinets with tape. Measured by the wall determines the length and height of the cabinets. Cut two pieces of 2.5 to 25 cm longer than pine just determined with a circular saw. These tables will serve as the base panels and the top of the cabinets. Cut two more pieces of pine cabinet height but 5 cm to the side panels.
Wood screws placed 5 cm through the upper and lower thickness in the side panels for securing the frame panels. Pine for the frame so that the bottom is flush with the floor of the garage storage cabinets. Slide the cabinet to the desired position against the garage wall. Place the frame with wood screws 5 cm at an angle through the top, bottom and side panels and towards the wall structures.
This post topic: Garage Storage