Old garage storage cabinet can be upgraded by replacing the doors and drawer fronts and sanding their front frames. Cabinet doors are made of solid wood for most of them. To make new doors and drawer cabinets update, you will be saving a lot of money and you can customize the door to your preference. The DIY can build custom wood cabinet doors to match the wood used in the house.
Measure the rough opening of the garage storage cabinet. This will cover the door opening when closed. Most door hinges are designed to overlap 1/2 inch (1.27 centimeters).
Transom cuts the material to the correct length for the garage storage cabinet. See the instructions of the router bit to cut the correct size from the full length of the rails. This is typically less than 3 1/2 inches (8.89 centimeters) to the total width of the door. Using a miter saw 90 degrees for this step.
Run the door panel through the router table. Run the upper door panel first through the edge router table. Assemble the door with wood glue on the cut of style. Hold the square brackets inside the garage storage cabinet. Let the glue dry before releasing clamps doors.
This post topic: Garage Design